Audio Technica AT33MONO MC Cartridge image
  • Audio Technica AT33MONO MC Cartridge image

Audio Technica AT33MONO MC Cartridge

Audio Technica Cartridges

Price: €332.25
VAT included
Quantity
  • In stock - Shipping Status
  • pack1_ local-shipping Created with Sketch.
    Tracked Shipping - Rates to
  • pack1_ lock Created with Sketch.
    Secure payment by Paypal & Stripe

The Audio Technica AT33MONO is designed specifically for use with mono vinyl records. The cartridge’s 0.65 mil conical stylus is mounted on a hard duralumin cantilever for excellent sound reproduction and dependable performance. 

The voice coils of Audio Technica AT33MONO are wired in series, resulting in one mono signal that is transmitted to the cartridge’s white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp.

Because the Audio Technica AT33MONO does not easily pick up unnecessary strain components from distorted or scratched records, it produces mono audio of a much higher quality than that generated by a stereo cartridge. 

If you need a cartridge for playing 78 RPM shellac records please choose the AT-MONO3/SP cartridge.

AUDIO TECHNICA
AT33MONO

Data sheet

Output voltage
0.35 mV (1 kHz, 5 cm/sec.)
Frequency response
20Hz - 20kHz
Cantilever
Duralumin
Weight
6.9 g
Static compliance
20 x 10 – 6 cm / dyne
Vertical tracking angle
23°
Dynamic compliance
6 x 10 – 6 cm / dyne (100 Hz)
Type
Mono Moving Coil
Recommended load impedance
More than 100 ohms (when head amplifier is connected)
Vertical Tracking Force
2.3 - 2.7g (standard 2.5g)
Stylus Construction
2.5 mil Bonded Conical
Mounting
Half Inch Mount

You might also like