Goldring E3 MM Cartridge image
  • Goldring E3 MM Cartridge image

Goldring E3 MM Cartridge

Goldring Cartridges

Price: $109.48
No VAT
Quantity
  • In stock - Shipping Status
  • pack1_ local-shipping Created with Sketch.
    Tracked Shipping - Rates to
  • pack1_ lock Created with Sketch.
    Secure payment by Paypal & Stripe

Goldring E3 comes with a 0.3 x 0.7 mil super elliptical bonded stylus on aluminium cantilever whose main effect  is the reduction of sibilance, especially in high level vocal recordings.

The E series is the successor of the Goldring Elan’s and Goldring Elektra’s and uses Magnetic Duplex Technology which improves stereo rendition. The E-family has threaded inserts which allows you to mount the cartridge more easily to the headshell using only screws. 

Goldring E3 presents a fluid and musical sound with good high frequency detail due the smaller front-to-back radius of the elliptical stylus. 

All styli in the E-series are interchangeable:

DaCapo Audio recommend Goldring E3 for medium to high mass tonearms and 20 hours of break-in.

GOLDRING
GL0058

Data sheet

Cantilever
Aluminium
Static compliance
20 mm/N
Vertical tracking angle
20°
Channel separation
More than 20 dB at 1 kHz
Stylus profile
Elliptical
Stylus radius
0.3 x 0.7 mil
Frequency range
20 Hz - 20 kHz
Channel balance
1.5 dB at 1 kHz
Cartridge mass
6.9 g
Load resistance
47 kΩ
Load capacitance
100 - 200 pF
Internal resistance
410 Ω
Colour
Violet
Internal inductance
400 mH
Sensitivity
3.5 mV (1 kHz @ 5 cm/sec)
Fixing centres
12.7 mm (0.5 in)
Playing weight
1.5 g - 2.5 g (2.0 g recommended)

You might also like