Audio Technica’s AT VM95E features a dual magnet design and an elliptical stylus on aluminium cantilever in a durable low resonance polymer housing.
It is available in two versions
AT-VM95E - cartridge only without headshell (half-inch mount allows convenient mounting in most headshells)
AT-VM95E/H - cartridge factory pre-mounted in Audio Technica AT-HS6BK Headshell. The total weight is 15.5 gram
Please select the desired version before adding it to the shopping basket.
The output voltage of the AT-VM95E is 4 mV.
Audio Technica AT-VM95E has the advantage of threaded inserts in the cartridge body, which enable the cartridge to be mounted to the headshell with just two screws – no nuts or washers are required.
With an Technica VM95 series cartridges you have the possibility to change the stylus to any Audio Technica VMN95 replacement stylus in the series depending on your preferences, taste and needs.
AT-VM95E replaced the successful AT95E and AT95EX cartridges.
- Output voltage
- 4mV @ 1kHz5cm/sec
- Frequency response
- Static compliance
- 17 x 10-6 cm/dyne
- Vertical tracking angle
- Dynamic compliance
- 7 x 10-6 cm/dyne @ 100Hz
- Channel separation
- better than 20 dB @ 1 kHz
- Stylus profile
- Bonded Elliptical
- Stylus radius
- 0.3 x 0.7 mil
- Tracking force
- 1.8g - 2.2g
You might also like