Audio Technica AT-VM95EN is by many considered the most harmonic cartridge in the VM95 series.
It is available in two versions
AT-VM95EN - cartridge only without headshell (half-inch mount allows convenient mounting in most headshells)
AT-VM95EN/H - cartridge factory pre-mounted in Audio Technica AT-HS6BK Headshell.
Please select the desired version before adding it to the shopping basket.
The Audio Technica AT-VM95EN features a dual magnet design and an 0.3 x 0.7 mil nude elliptical stylus on aluminium cantilever in a durable low resonance polymer housing.
The specially wound coils of the Audio Technica AT-VM95EN - AT-VM95EN/H result in an increased output voltage.
Like all pickup cartridges in the Audio Technica VM95 series the Audio Technica AT-VM95EN / AT-VM95EN/H has the advantage of threaded inserts in the cartridge body, which enable the cartridge to be mounted to the headshell with just two screws – no nuts or washers are required.
With an Audio Technica VM95 series cartridge you have the possibility to change the stylus to any Audio Technica VMN95 replacement stylus in the series depending on your preferences, taste and needs.
All cartridges in Audio Technica VM95 series come with the universal ½”- mount.
- Output voltage
- 3.5mV @ 1kHz5cm/sec
- Frequency response
- Static compliance
- 20 x 10-6 cm/dyne
- Vertical tracking angle
- Dynamic compliance
- 7 x 10-6 cm/dyne @ 100Hz
- Stylus profile
- Stylus radius
- 0.3 x 0.7 mil
- Tracking force
- 1.8g - 2.2g
You might also like