Audio Technica AT-XP5 Cartridge
Audio Technica Cartridges
Price: $85.44
No VAT
- Subject to
Shipping Costs
-
In stock - Shipping Status
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
Audio Technica AT-XP5 is the midrange cartridge for the new Audio Technica series specially designed for DJs. It has a 0.3 x 0.7 mil elliptical bonded stylus mounted on a carbon reinforced cantilever and has excellent tracking ability, fidelity and reliable performance.
It is available in two versions
AT-XP5 - cartridge only without headshell (half-inch mount allows convenient mounting in most headshells)
AT-XP5/H - cartridge factory pre-mounted in Audio Technica AT-HS6BK Headshell
Please select the desired version before adding it to the shopping basket.
The new highly-rigid polyphenylene sulfide (PPS)/glass fiber body cartridge and stylus design of the Audio Technica XP series provides maximum visibility of the stylus tip for convenient DJ working conditions.
All the Audio Technica XP styli are interchangeable and as a bonus feature, the needles of the Audio Technica AT-VM95 HiFi cartridge can also be used with the Audio Technica XP series which has a higher and more powerful output than the VM95 series which gives a more punchy sound. This offers a wide choice of options for every budget and sound adaptation.
The recommended tracking force of the Audio Technica AT-XP5 / AT-XP5/H is 2g - 4g (optimum 3g) and the output level is 5,5 mV.
AUDIO TECHNICA
617006
Data sheet
- Output voltage
- 5.5 mV (at 1 kHz, 5 cm/sec)
- Frequency response
- 20 to 18,000 Hz
- Cantilever
- Carbon reinforced ABS
- Static compliance
- 20 x 10 – 6 cm / dyne
- Vertical tracking angle
- 20 degrees
- Dynamic compliance
- 6.0 x 10 – 6 cm / dyne (100 Hz)
- Recommended load impedance
- 47,000 Ω
- Vertical Tracking Force
- 2.0 to 4.0 g (standard 3g)
- Stylus Construction
- Bonded Round Shank
- Mounting
- Half-inch
- Channel separation
- 20 dB (1 kHz)
- Recommended load capacitance
- 100-200 pF
- Replacement stylus
- ATN-XP5
- Dimensions
- 17.2 x 17.8 x 28.3 ( H x W x D mm)
- Stylus shape
- Elliptical
- Cartridge Weight
- 6.2g
- Coil Impedance
- 6,700 ohms (1 kHz)
- Coil Inductance
- 550 mH (1 kHz)
- Output Channel Balance
- 2.0 dB (1 kHz)
- Accessories Included
- Two 11 mm installation screws; Two 8 mm installation screws; Two washers; Two Nut; Non-magnetic screwdriver
- Stylus Size
- 0.3 x 0.7 mil
You might also like
