

Audio Technica AT-VM95SH Cartridge
Audio Technica Cartridges
-
In stock - Shipping Status
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
Audio Technica AT-VM95SH is together with Audio Technica AT-VM95ML the top of the line cartridge in the VM95 product line. Audio Technica’s AT VM95SH comes with dual magnet’s and with a 2.7 x 0.26 mil Shibata stylus on aluminum cantilever in a durable low resonance polymer housing.
The specially wound coils of the Audio Technica AT VM95SH increase output voltage
Audio Technica AT-VM95SH has the advantage of threaded inserts in the cartridge body, which enable the cartridge to be mounted to the headshell with just two screws – no nuts or washers are required.
When acquiring any of the Audio Technica VM95 series cartridges you have the possibility to change the stylus to any Audio Technica VMN95 replacement stylus in the series depending on your preferences, taste and needs.
Like the other cartridges in Audio Technica VMN95 series the Audio Technica AT VM95SH comes with the universal ½”- mount.
Data sheet
- Output voltage
- 3.5mV @ 1kHz5cm/sec
3.5mV @ 1kHz5cm/sec
3.5mV @ 1kHz5cm/sec
3.5mV @ 1kHz5cm/sec
3.5mV @ 1kHz5cm/sec
3.5mV @ 1kHz5cm/sec - Frequency response
- 20Hz-25kHz
- Static compliance
- 20 x 10-6 cm/dyne
- Vertical tracking angle
- 23°
23° - Dynamic compliance
- 10 x 10-6 cm/dyne @ 100Hz
- Channel separation
- 23dB @ 1Khz
- Stylus profile
- Nude Shibata
- Tracking force
- 1.8g - 2.2g
You might also like