

Audio Technica AT-VM95C/H Cartridge with headshell
Audio Technica Cartridges
-
In stock - Shipping Status
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
Audio Technica’s AT-VM95C/H is an Audio Technica AT-VM95C pre-mounted on an Audio Technica AT-HS6 Headshell.
The Audio Technica AT-VM95C/H is the entry level pickup in the AT-VM95 series. However you should not disqualify this cartridge in advance. The conical stylus has many friends amongst vinyl enthusiasts for its very present, full and almost bodily sound performance, which for many outweighs the lack of details in the treble area.
The total weight is 15.5 gram.
Audio Technica’s AT VM95C comes with dual magnet’s and with a conical stylus on aluminum cantilever in a durable low resonance polymer housing. The output voltage of the AT-VM95C is 4 mV.
Audio Technica AT-VM95C has the advantage of threaded inserts in the cartridge body, which enable the cartridge to be mounted to the headshell with just two screws – no nuts or washers is required.
When acquiring any of the Audio Technica VM95 series cartridges you have the possibility to change the stylus to any Audio Technica VMN95 replacement stylus in the series depending on your preferences, taste and needs.
Like the other cartridges in Audio Technica VMN95 series the Audio Technica AT VM95C comes with the universal ½”-headshell mount.
Our support team of experts is ready to answer your questions.
Data sheet
- Output voltage
- 4.0mV @ 1kHz5cm/sec
4mV @ 1kHz5cm/sec - Frequency response
- 20 to 20.000Hz
20-20.000Hz - Static compliance
- 17 x 10-6 cm/dyne
17x10–6 cm / dyne - Vertical tracking angle
- 23°
- Dynamic compliance
- 6.5 x 10-6 cm/dyne @ 100Hz
6.5 x 10–6 cm / dyne (100 Hz) - Stylus profile
- Bonded Conical
Spherical - Stylus radius
- 0.6 mil
- Tracking force
- 1.8g - 2.2g
You might also like