Sumiko Blue Point Special EVO III High output MC
Sumiko Cartridges
-
Currently not available.
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
Sumiko Blue Point Special EVO III High is designed for use with MM phono stages, meaning you can achieve moving coil sonics without investing in MC preamplification. The Blue Point Special EVO III’s are the top of the line of Sumiko’s Oyster series.
The Blue Point Special EVO III High is an open-body moving coil cartridge that offers a sense of spatial awareness you’d normally spend much more to achieve. The Sumiko cartridge has an overall rich, textured & tonally balanced reproduction with startling realism.
For those with MC-capable phono sections we offer the Blue Point Special EVO III Low. It expands on what the high output is capable of, offering true moving coil soundstaging that’s near impossible to find elsewhere for your money.
All Sumiko’s cartridges are handcrafted in Yokohama, Japan and deliver a performance that has enlightened generations of listeners.
Sumiko Blue Point Special EVO III High output has the universal ½”-mount and threaded inserts in the cartridge body, which enable the cartridge to be mounted to the headshell with just two screws.
We recommend around 20 hours break-in.
Don’t hesitate to contact our support team if you need help to pick the right cartridge for your needs and preferences.
Data sheet
- Output voltage
- 2.5mV
- Frequency response
- 12Hz – 40kHz
- Cantilever
- ⌀0.5mm Treated Aluminum Alloy
- Vertical tracking angle
- 20°
- Channel separation
- 30dB @ 1kHz
- Tracking force
- 1.8g – 2.2g
- Replacement stylus
- Re-Tip Exchange (See Dealer)
- Channel balance
- Less than 0.5dB @ 1kHz
- Cartridge mass
- 8.3g
- Stylus Type
- 0.3 x 0.7mil Elliptical
- Coils
- High-Purity Copper
- Compliance
- 12×10-6cm/dyn @ 100Hz
- Load resistance
- 47kΩ
- Load capacitance
- 100pF – 200pF
- Internal resistance
- 135Ω
- Dimensions
- 17.1 x 20.5 x 28.20mm (WxHxD)
- Recommended racking force
- 2.0g
You might also like