

Goldring E3 MM Cartridge
Goldring Cartridges
-
In stock - Shipping Status
-
Tracked Shipping - Rates to
-
Secure payment by Paypal & Stripe
Goldring E3 is the top of the line of the Goldring E-family cartridges. It comes with a 0.3 x 0.7 mil super elliptical bonded stylus on aluminium cantilever whose main effect is the reduction of sibilance, especially in high level vocal recordings.
The E series is the successor of the Goldring Elan’s and Goldring Elektra’s and uses Magnetic Duplex Technology which improves stereo rendition. The E-family has threaded inserts which allows you to mount the cartridge more easily to the headshell using only screws.
In this top of the series E3, Goldring presents a fluid and musical sound with good high frequency detail due the smaller front-to-back radius of the elliptical stylus.
All styli in the E-series are interchangeable:
We recommend Goldring E3 for medium to high mass tonearms and we recommend 20 hours of break in period.
The experts from DaCapo Audio support team are happy to help you in choosing the right stylus.
Data sheet
- Cantilever
- Aluminium
- Static compliance
- 20 mm/N
- Vertical tracking angle
- 20°
- Channel separation
- More than 20 dB at 1 kHz
- Stylus profile
- Elliptical
- Stylus radius
- 0.3 x 0.7 mil
- Frequency range
- 20 Hz - 20 kHz
- Channel balance
- 1.5 dB at 1 kHz
- Cartridge mass
- 6.9 g
- Load resistance
- 47 kΩ
- Load capacitance
- 100 - 200 pF
- Internal resistance
- 410 Ω
- Colour
- Violet
- Internal inductance
- 400 mH
- Sensitivity
- 3.5 mV (1 kHz @ 5 cm/sec)
- Fixing centres
- 12.7 mm (0.5 in)
- Playing weight
- 1.5 g - 2.5 g (2.0 g recommended)